Matshita Dvd-ram Uj-861h Drivers For Mac

Hi,
Drive or cable could have an issue.
Stage 1 : Please do all the below even if you have done some before as it is often the total
process which solves the issue.
Try this - Control Panel - Device Manager - CD/DVD - double click the device - Driver's Tab -
click Update Drivers (this will likely do nothing) - then RIGHT CLICK the drive - UNINSTALL -
REBOOT this will refresh the default driver stack. Even if drive is not shown continue
below.

Then work your way through these - remember the drive could be bad, could have a loose
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD drive or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Manually try this fix if the 314060 Fixit did not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD drive or DVD drive is missing or is not recognized by Windows or other programs -
a Mr Fixit
http://support.microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded
to Windows Vista
http://support.microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.microsoft.com/gp/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows
Vista setup after booting from the DVD (AHCI)
http://support.microsoft.com/kb/952951

CD-R drive or CD-RW drive is not recognized as a recordable device
http://support.microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.microsoft.com/gp/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then check cables in both
ends. Remove and replace, do not just snug. For laptops you can often clean the power and
data contacts with a pencil eraser.
Some DVD drives do not use the Windows default drivers so check with the System maker and
device maker to see if there is firmware or drivers for your drive if needed.
Stage 2 : You could have drive issues as the CD/DVD is actually 4 drives in 1 case ( CD & DVD
burn and CD and DVD read). So it is not unusual for 1 or 2 parts to not function while the others
do so properly.
Did you complete the troubleshooter for the drive that still does not work? There are some
registry entries that the troubleshooter does not fix and those 'might' be the cause.
Check with your System Maker and Device maker for both possible firmware updates and
the correct Registry entries for your drive.
These are the keys I think are the ones in question - for the CD/DVD drive sub-keys of course
as there will other sub-keys in these keys. Be sure to ask for specific keys involved as well as
the settings.
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetEnumIDE
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetHardware Profiles0001SystemCurrentControlSetEnumIDE
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You probably can find more info here and maybe even the exact registry settings for your CD/DVD
drive from someone with the same model.
Forums - a lot of real expert help
http://club.myce.com/
CD/DVD units
http://www.myce.com/storage/

Driver Matic allows the installation of a driver with the click of a matshita dvd-ram uj-861h ata. Updates can be accomplished in two ways: Kinda like fixing a watch. A driver update may also improve stability and performance, or may fix issues with games, programs and power management.

• MATSHITA DVD-RAM UJ-861H Firmware 1.50 download Matshita uj 861h drivers can unlock additional mtashita for a device that may not have been available before. Remove ALL power, then check cables in both ends.
• Next - it will instantly locate the proper MATSHITA DVD-RAM UJ-861H hardware driver, and any other driver you need, download and install it onto your system - giving you optimum performance & speed. This entire process takes under 2 minutes.
• Driver Genius will automatically scan and find the official MATSHITA DVD-RAM UJ-861H driver matching your needs - no matter what windows version you're using. Now you can finally use the same driver update tools used by PC technicians and eliminate any guess work and time waste in the process of updating your drivers.
• Driver Matic allows the installation of a driver with the click of a matshita dvd-ram uj-861h ata. Updates can be accomplished in two ways: Kinda like fixing a watch. A driver update may also improve stability and performance, or may fix issues with games, programs and power management.
• Home » MATSHITA DVD-RAM UJ-861H ATA Device Use the links on this page to download the latest version of MATSHITA DVD-RAM UJ-861H ATA Device drivers. All drivers available for download have been scanned by antivirus program.

Use DevManView to locate CD/DVD in registry (be careful and make a Restore Point before
changing anything) - find the device in DevManView and then Right Click on it Open in RegEdit.

Canon Drivers For Mac

DevManView - Free - an alternative to the standard Device Manager of Windows, which displays all
devices and their properties in flat table, instead of tree viewer
http://www.nirsoft.net/utils/device_manager_view.html
Hope this helps.

Canon Printer Drivers For Mac

Rob Brown - Microsoft MVP <- profile - Windows Expert - Consumer : Bicycle - Mark Twain said it right.